Re: Nasty screws and bolts

["twinenginedmc12" <twinenginedmc12@xxxx>]

> So what's the best option now? Cut the tray up into pieces so I can
> get to the washer pump? Take the entire front end apart? Drill the
> bolts and then replace them with...? This should have been a 20
> minute job...
> 
> Aaron
> #1506

Hi Aaron.

My car had lots of screwed up bolts. I drilled out some, used a 
handheld rotary tool (Dremel) with the little cutoff wheels on 
others, and on a few, I used an industrial silicon carbide cutoff 
wheel in a drill chuck.

I think I drilled some of those fasteners on my car, but I can't 
remember.

Rick.