Alternator change-out

["nbrommer2k" <nickbrom@xxxx>]

Hello group,

I'm currently *trying* to change out my alternator. The alternator 
I'm installing is this one:

<http://autoexpress.safeshopper.com/1261/9102.htm?506>


Question one: The universal bracket I'm trying to use is not working, 
the hole on the alternator is too far "around" it for the universal 
bracket to reach around and connect. Not enough angle, the universal 
bracket is too straight. Any thoughts?

Also, since the new alternator is GM, I've purchased the generic plug 
for the wires. Question: the plug has a white wire and red wire. The 
harness on the car has two wires of similar color. One is about 3 
times the size of the other. Am I correct in assuming that the thick 
wire should connect to the red wire on the adapter plug? And what is 
the function of these wires?

This whole project is becoming more perplexing than I anticipated. It 
may be due to the fact that it may not have had the original 
alternator on it in the first place.

I'm sure more questions will follow, but any enlightnement you can 
pass along will be appreciated!

Nick
VIN 3092