Re: [DML] AC fan 3 and 4 positions

["David Teitelbaum" <jtrealty@xxxx>]

You need to order a relay upgrade kit. Included in the kit are 2 new
circuit breakers, one for the heater fan and one for the radiator fans.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, id <ionicdesign@xxxx> wrote:
> Sounds like the circuit breaker needs replacing.
> 
> Mark
> 6683
> 
> dmcorlando2003 wrote:
> 
> > After my AC runs for awhile (30-45 min or so) Wen the Fan is on 3 or
> > 4 it cuts off. I kow the are on two seperate relays, one for 3 and
> > one for 4. Whatis causing this...is it that they are over heating?
> > Do they need to be replaced? (Should I swap them with one of the
> > other relays like the high or low beam and try that first?)
> >
> > Unfortunately I am never in a position to check them out when the fan
> > stops.
> >
> > Michael
> > Vin# 2944