Re: Accelerator Pedal

["David Teitelbaum" <jtrealty@xxxx>]

Check the cable and the throttle spool for ease of movement, if either
is hard to move then the pedal linkage and bracketry bends so you
won't get full travel preventing you from opening the throttle all the
way. Once you find out what is binding bend the pedal linkage so you
have full travel when you push the pedal all the way down. Make sure
at WOT (wide open throttle) the throttle spool hits the full
enrichment micro. Be careful, a binding throttle is DANGEROUS. If it
gets stuck open you could lose control of the car. There is also a way
to adjust the spring inside the throttle spool by moving the end into
different slots. You might try lubing the throttle cable as per the
throttle recall.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Kramer" <jettaman95@xxxx> wrote:
> Ever sinceI got the car a few months back the accelerator pedal is 
> stiff. It takes a good amount of force to get it up to a good RPM but 
> also I could have the pedal to the metal and the car still would not 
> to going faster. An example of this is when I am going on the highway 
> and I need a little more speed. I have my pedal pushed to the floor 
> But I am not going any faster. Anyone familiar with this problem?