Re: Front Rotor Replacement

["Harold McElraft" <hmcelraft@xxxx>]

Take them to a NAPA store with a machine shop. Their machinists are 
certified and NAPA has the replacement bearing. Have them mount the 
rotors for you too. BTW, if the rotors have not been cut before, 
NAPA may be able to refinish them . I did mine a few years ago and 
they are great. Don't forget the loctite for the rotor mounting 
bolts.

Harold McElraft - 3354



--- In dmcnews@xxxxxxxxxxxxxxx, Delorean17@xxxx wrote:
> Hi List,
> Today I finally decided to replace my warped rotors since 
prom is 
> friday. Both hubs came off fairly easily but the bearings pretty 
much fell 
> apart when I pressed the hub off the shaft. I wanted to replace 
the front 
> bearings anyway as one was making a little noise.
> I have never installed rotors or bearings before but it 
doesnt seem 
> too hard. How should I go about installing the front bearings 
into the hub? 
> Should I have a machine shop press them in or is this something I 
could do? 
> any info on the assembly of the front hub/rotor would be 
appreciated.
> 
> Thank You
> 
> 
> Dave,
> #6286
> 
> 
> [Non-text portions of this message have been removed]