"When all else fails, get a bigger hammer?"

[doctordhd@xxxx]

I'm not a guy who likes to use a hammer to fix things but after the advice on 
the list I tried it. One of my cooling fans wasn't running so I jacked up 
the "D" and slid under it to take a look. I unplugged the fan motor wires 
and connected them to a 12 volt power supply. Then I tapped the back of the 
motor housing ever so gently. The fan turned a couple of degrees. I thought 
it was mearly from the vibration of the tapping but each time I tapped it 
turned more and more until it ran by itself! Now it seems to work properly 
when reconected. I'm not sure how long this "fix" will work but I can't seem 
to figure out how to remove the motor without taking the entire front of the 
car off. Any ideas and comment would be appreciated.

Dave
6530


[Non-text portions of this message have been removed]