Re: Master Brake Cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Master Brake Cylinder
- From: "v_davidj" <v-davidj@xxxx>
- Date: Thu, 06 Mar 2003 08:15:08 -0000
Dave,
I rebuilt my master cylinder about a year ago. I purchased my
rebuild kit from NAPA (www.napaonline.com). The kit was made by
Raybestos part # UBP1544. I believe it cost about $45.
Hope this helps. Good luck!
Dave Jacobs
6406
--- In dmcnews@xxxxxxxxxxxxxxx, doctordhd@xxxx wrote:
> Henry,
>
> I read your recent post on the master brake cylinder but I was
unable to find
> any parts supplier, not even Autozone that carries the Fernco
M52329. (Also
> the people I spoke to said it is Fenco, not Fernco.)
>
> They found a listing but then said it is not even available from
the company.
>
> Another source mentioned a part from a Saab 900, but did not
mention the
> year. Any ideas here?
>
> Any other recommendations for repairing a master brake cylinder
that seems to
> be leaking fluid rapidly. The stains are on the brake booster and
there is a
> puddle under the car.
>
> Dave
> 6530
>
>
> [Non-text portions of this message have been removed]
Back to the Home of PROJECT VIXEN