Re: Water Pump

["David Teitelbaum <jtrealty@xxxx>" <jtrealty@xxxx>]

If you use a silicone sealer make sure on the tube or the package it
SAYS "sensor safe". If you are not using the silicone hoses behind the
water pump then you have to get the clamps as tight as you can because
you will not be able to get there again to retighten them. You should
also, at the same time, replace the bearings in the idler pulleys, the
belts, and if the car hasn't had a tune-up in a long time replace the
cap, rotor, ignition wires and spark plugs, it's really easy when you
do the water pump. Also as long as you are in there you should be
replacing the seals on the water distribution pipe and any vacuum
hoses that are stiff. Use new copper seals on any fuel lines that you
disconnect.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "kenndeal <kenndeal@xxxx>"
<kenndeal@xxxx> wrote:
> Installing a new water pump tomorrow. Any recommendations 
> on gasket sealers and anti-seize compound for the Delorean?