Re: [DML] biggest speaker possible in rear speaker holes

[dherv10@xxxx]

Andy, There is a difference in 4 ohms resistance and 4 ohms impedance that 
speakers run on. If the total ohms of impedance doesn't match the output 
impedance of the unit your installing, it will sound bad. You can't really 
measure impedance with an ohm meter. You just have to hook it up the way the 
manufacture says to match.
John Hervey
www.specialTauto.com



<< so if it is possible to have both my pods and my dash speakers hooked up, 
how 
would i do that? of course i would need a bass-blocker to keep the low end 
out of the dash speakers, but how would i wire it so that my head unit can 
handle running four speakers on the fronts instead of two? i am not 
knowledgable in playing with ohm loads and such - i would assume i need to 
drop the load so the two speakers are running at 2ohms each if i am running 
4ohm on just the kicks? i believe the dash speakers are 4ohm also.
>>