Re: [DML] No power beyond 4000 rpm
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] No power beyond 4000 rpm
- From: dherv10@xxxx
- Date: Fri, 22 Nov 2002 21:51:28 EST
Scott, Now that that has been replaced. I would be sure the 02 adjustment is
now correct. In other words, get the car hot and readjust. Be sure the spark
advance/timing is ok. If this doesn't do it, then you many need to look at
the injectors. Clean or new makes a big difference.
<< My car has no power beyond 4000 rpm.
It was having hard start problems. A new warm-up regulator solved that
problem.
Now it won't run past 4000 rpm while driving.
Last spring, I did a major tune-up and it ran fine. My fuel
pump/suction line/strainer are fine. I have a new accumulator and fuel
filter installed. Also the injectors were replaced last spring.
What should I do next? I can't remember if this is a characteristic of
a failing coil. The car has about 27K on it.
What do you think?
>>
Back to the Home of PROJECT VIXEN