Re: [DML] Rough idle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Rough idle
- From: "B Benson" <delornut@xxxx>
- Date: Thu, 14 Nov 2002 18:00:00 -0600
Make sure the electric plug to the vacuum advance solenoid by the
distributor is plugged in. If it isn't the car will idle rough but run
normally at speed. It's easy to knock it off when working around that part
of the engine compartment.
Bruce Benson
> My car has developed a rough idle that has been most annoying. It sits
> around 850 RPMs, and I know my idle speed motor is working. When it's at
> this engine speed, it almost sounds like a distant helicopter. By that
I'm
> assuming it's not firing correctly on one cylinder at idle. It doesn't
feel
> like a completely dead cylinder, as when I'm driving it has all the power
it
> used to. I can rev it up and the engine sounds very smooth and quiet.
> payne
>
Back to the Home of PROJECT VIXEN