[DML] Non Starting problem

[Phil Priestley <phil@xxxx>]

I checked the Idle speed motor and it is working. I got it to fire up 
and was able to keep it running for a minute by keeping my foot on the 
gas, but it smelled like it was running real rich. I know the timing 
has got to be off so is there a way to get the timing set fairly close 
so I can get it idling to set it correctly?
On Wednesday, November 6, 2002, at 05:47 PM, dherv10@xxxx wrote:

> Phil, Two things to check.
> #1 Is the connection on the top of the idle speed motor good and 
> tight. Is it
> getting power and opening the valve when the throttle is in the rest 
> position.
> #2. Since it sounds like it's choking down. Turn the bottom idle screw 
> clock
> to open up the throttle body butterflies a little more and then see 
> what
> happens.
> Be sure to not flood the car by trying to keep on cranking it. If need 
> be,
> unplug the cold start valve and try it again.
> John Hervey
> www.specialTauto.com
>
>
> << Now that these things have been replaced/repaired. I can't get the
> thing to stay running. When you turn the key, It fires up and as soon
> as it settles down to idle it dies or if it does run, runs rough and
> dies if you step on the throttle.
> > >
>
>
> To address comments privately to the moderating team, please address:
> moderators@xxxx
>
> To search the archives or view files, log in at 
> http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to 
> http://docs.yahoo.com/info/terms/