Re: [DML] those &^%$# door lights

[dherv10@xxxx]

Mike, With a rubber tip on the end of the plunger, the rubber won't slip when 
it comes in contact with the door and your probably pushing down instead of 
pushing in. Put a small amount of electrical grease or a heavy oil ( to 
experiment with ) on the part of the door the rubber plunger will hit so it 
will slide in. You might put a small amount on the rubber plunger also. 
John Hervey
www.specialTauto.com


<< I have the rubber tip on it and it is secured correctly on the side of 
dash.....My door closes perfectly. I know these lights staying on is a 
common 
problem and a major source of battery drain. When I drive, the red door ajar 
light blinks intermittently just to remind me the problem is there :-) I 
have now just unhooked the electricity to that switch until I find a 
solution. >>