RE: [DML] Radio install question

["Kevin Abato" <delorean@xxxx>]

Yeah...and it is REALLY fun to reach up there! ;)

-----Original Message-----
From: Marc A. Levy [mailto:malevy@xxxx] 
Sent: Thursday, September 05, 2002 10:39 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: RE: [DML] Radio install question

If it is REALY high power (50+ watts) then you should connect it to the
battery with the fuse as close to the battery as possible.

You can replace the dash speakers by just reaching up in there. No need
to remove anything.

-----Original Message-----
From: Hank Eskin [mailto:henry@xxxx]
Sent: Thursday, September 05, 2002 6:01 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Radio install question

Hello All,

I just got my Alpine CDA-7894 head unit to install, and due to the
"V-drive" internal amp, it requires a direct connection to the battery,
or some suitable high-current draw positive power source. Besides
connecting directly to the battery, can anyone suggest an equivalent
connection point in the electrical panel/fuse area? And don't worry,
the lead already has an in-line 20A fuse.


To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/