Re: Wiper control module service procedure (also hazard flasher and buzzer box)

["jtrealtywebspannet" <jtrealty@xxxx>]

The hazard flasher (otherwise known as the 4-way flasher) is also the 
turn signal flasher. In the Delorean the wiring system is wired in 
such a way as to use the same flasher for both turn signals and 4-ways 
as opposed to most cars which have a separate flasher for the turns 
and 4-ways. The manual does leave many things out, for instance to 
reinstall many things it will say something like reverse the procedure 
for uninstalling! It assumes the person doing the procedures is 
proficient enough to know what they are doing without spelling out 
everything, this is not the best car to learn on for the first time. 
In this case it takes more time to get the duct out of the way then to 
actually get to the module or flasher or door buzzer.
David Teitelbaum
vin 10757


--- In dmcnews@xxxx, "ksgrimsr" <knut.s.grimsrud@xxxx> wrote:
> Notice: This message contains informative content based on 
first-hand experience rather than speculation and conjecture.
> 
> I had occasion to remove my wiper control module the other day 
> securing module." Although the service manual is correct that the 
> module is secured with 2 screws, the instructions trivialize the 
> procedure and are wholly unhelpful if you actually find you need to 
> remove the module.