Re: Fw: oil pressure
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Fw: oil pressure
- From: "tmpintnl" <tobyp@xxxx>
- Date: Sat, 17 Aug 2002 00:34:44 -0000
Bob - It is more than likely a bad sending unit. I damaged mine
during an oil filter change, and it "pegs" with the engine running. I
know that my pressures are correct. There are several replacement
senders that are advertised as being "more accurate" than the original
sender. Most vendors have them available. The sending unit for the
gauge is next to the oil filter. The sending unit for the idiot light
is on the opposite side, just behind the A/C compressor. If the idiot
light is functional, it *should* show a real problem if you have one.
Toby Peterson VIN 2248
Winged1
--- In dmcnews@xxxx, Bob wrote:
> I have had my 1981 Delorean since 1999 and have noticed that the oil
pressure is maxing out past 80psi.! The car has 18000 original miles
and I have changed the oil regularly. When I first got the car I
warmed it up then changed the oil. Then I ran it 100 miles and
changed it again. It seems to be flowing through the engine alright
but it worries me. Could it just be a bad sensor? Bob
>
Back to the Home of PROJECT VIXEN