Re: Brake proportioning valve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Brake proportioning valve
- From: "basfe25" <dmcman73@xxxx>
- Date: Fri, 02 Aug 2002 14:07:11 -0000
We are talking about the Delorean right? It has four wheel disk
brakes....only adjustment that the brakes need are for the parking
brakes.
Steve
--- In dmcnews@xxxx, "content22207" <brobertson@xxxx> wrote:
> I'm afraid Josh is correct on a car w/ rear drums. Without the
> proportioning valve, braking is rather squirrely (trust me -- I've
> tried it). On 4 wheel disc however does not seem to be necessary
(I've
> done that too, but it *IS* a 5,000 pound Lincoln). Guess it's
because
> hydraulic fluid is self adjusting.
>
> Bill Robertson
> #5939
>
> >--- In dmcnews@xxxx, jwit6@xxxx wrote:
> > In a message dated 8/1/02 11:37:02 AM Eastern Daylight Time,
> > dmcman73@xxxx writes:
> >
> > << HUH? The front and Rear calipers are already on separate
lines. They
> > do not have a common pipe. One pipe for the two front calipers
goes
> > to one port of the brake Master Cylinder and the other pipe for
the
> > rear calipers goes to another port on the Master Cylinders. The
> > ports on the Master Cylinders are already their own entity
(separate
> > from one another). >>
> >
Back to the Home of PROJECT VIXEN