Re: [DML] Brake Calipers, Tie Rod ends, Electrical Parts Source

[jwit6@xxxx]

For what it's worth,
Looks like the front DMC-12 rotors are from a Jag Sovereign series 1,2 and 3, 
1968 - 82 rears. Also on the Double Six 82-86 rear.

My orig DMC rotors hand measured:
254 mm dia, 24 mm height, 12.5 mm thich, 70 mm dia center hole, 4 bolt
The Jags show:
262 mm dia, 25.5 mm height, 12.5 mm thick, 70 mm dia center hole, 4 bolt
Specs came from www.dba.com.au Their #75 rotor.
Probably close enough. No spec on bolt hole diameter or spacing.

Jim 6147