Re: [DML] Brake Calipers, Tie Rod ends, Electrical Parts Source

[jwit6@xxxx]

In a message dated 7/30/02 5:41:36 PM Eastern Daylight Time, 
dmcman73@xxxx writes:

<< They have an updated brake system on their 
website for the front that consist of 2 vented rotors along with two 
4 piston calipers, hoses, updated pads, etc. I would be interested 
in that. >>

Now you got the idea !!!! :-)
If the TR6/TR7/Spitfire with the TR6 Girling type 16 caliper bolts up, and 
better yet if any of the rotors are the same, then brake upgrades become 
almost a no brainer....

Besides, the steering column, switches, steering racks , universal joints, 
and tie rod ends all look like they came from the same parts bins Triumph was 
using.

Does anyone have OEM front brake rotor dimensions so I don't have to pull 
mine off?
If so I'd be glad to find out if anything Rimmer Bros offers is a direct bolt 
on. Or better yet, Martin, why don't you take a walk over there and let us 
over here in the Colonies know what the scoop is?
Jim 6147