no start... UPDATE.. still in need of HEEEELp!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
no start... UPDATE.. still in need of HEEEELp!
- From: "Digital Devices" <delorean@xxxx>
- Date: Tue, 30 Jul 2002 02:22:50 -0400
Ok ... My previous attempts to set the timing on my car apparently
worked...
Causing it to start .
HOWEVER!
It cut out after a short few seconds
This caused me to investigate things further...
And I discovered that the circular "bobbing" intake on the mixture
control unit is strangely stiffer then usually. significantly
This leads me to believe that perhaps something with the fuel
distributor is not correct...
I double checked all the fuel lines. and ensured they were connected
properly... and properly torqued to spec into place
If I try to start it again... and I physically hold the intake on the
mixture control unit down ... it will run...
But as soon as I let it go . klunk .. turns off
What do you pro's have to say?
-Kenneth
05541
-->loosing his mind!!
[Non-text portions of this message have been removed]
Back to the Home of PROJECT VIXEN