Re: Here a ground. There a Ground. Everywhere a ground ground.... (was DeLorean

["content22207" <brobertson@xxxx>]

I think people jump as close to posts as possible to compensate for
usually small cables and unavoidable loss of conductivity between
bolted surfaces. 

I'd be more concerned w/ alternator output than where I clamped the
cables.

Bill
#5939

> All this talk about where to connect jumper wires is foolish. 
Electrically there is no difference where you connect your ground
jumper as the negative terminal of the batery (regardless of jumper or
jumpie) is directly bolted to the engine block.