Re: Incorrect door struts.

["basfe25" <dmcman73@xxxx>]

Rob at PJ Grady has a Heavy Duty Lower Door Loft Support Brackets 
(P/N 108563G) that will replace the bent bracket. I suggest getting 
this since the bracket already bent. If you bend it back it will 
weaken it more and even putting the correct strut on it will 
probably bend/break it. He also has the correct door lift pistons 
that he has custom made.

http://www.pjgrady.com/lgspec.asp?id=7

Steve


--- In dmcnews@xxxx, "twinenginedmc12" <twinenginedmc12@xxxx> wrote:
> I recently purchased a set of door struts. Unfortunately, the 
> geometry of the replacement struts was not compatible with the 
> original struts,....... and to my horror found that the strut mounting post on the roof support was bent during the very first trial door closure.