Re: [DML] Mode switch

["dtt2150" <dtt2150@xxxx>]

Do you grease the flat part or the one with the grooves. What grease 
would you use?

thanks

Mike

--- In dmcnews@xxxx, dherv10@xxxx wrote:
> Paul, I've taken several apart and cleaned them also, did you 
grease the 
> rubber diaphragm before putting it back together. Most of the time 
they only 
> go back one way. You might also look at the pictures on my Talk & 
View page 
> under reference, it might help.
> John Hervey
> http://www.specialtauto.com/ref_main.shtml
> 
> << So I've taken my mode switch apart and the diaphragm was clogged 
with dirt
> and grim and a bit sticky, it's now all cleaned up and looking 
new....
> 
> Put it together and its worse than before, could I have put it 
back in the
> wrong setting?? if so how can I check if its right and line it up 
with the
> right vacuum outlets?? >>