Re: [DML] Rear Shocks

[jwit6@xxxx]

In a message dated 6/5/02 9:16:47 PM Eastern Daylight Time, wingd2@xxxx 
writes:

<< I find it 
amazing that according to your info, the shocks that are used on the Chevy 
Corvette happen to be the same as those used on full sized Fords and 
Mercury's and Nissans. >>

Marty,
I made it clear that these were not "MY" cross refs, but came from an AMC 
club web site. I have the NAPA 94004 Gas Charged Deluxe installed. I believe 
they are made by Tenneco. The same company that makes the Monroe's your club 
sells. They are dimensionally correct. They are so reasonably priced that 
next week I may install the Monroe Sensa Track units just to see the 
difference. By Knowing a cross ref application, you can shop with almost any 
shock manufacturer to get what you want. Even fully adjustable shocks I'm 
sure. KYB, Gabriel, Carrerra, the options are there. A quick stop at your 
NAPA dealer and he can probably tell you in no uncertain terms what the 94004 
fits. I made it perfectly clear where the listed applications came from and 
advised that with anything other than the 94004, you should confirm the 
dimensions. Then you can pick the performance level you want based on the 
fit. Most of us are capable of independent thought. But there are always the 
high quality vendor solutions like PJ Grady's set up for those who just want 
to get on with it. Hope I didn't threaten anyone by making this info public.
Jim
6147