Alignment problems?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Alignment problems?
- From: Delorean17@xxxx
- Date: Wed, 22 May 2002 21:53:00 EDT
Hi,
I finally had my car aligned today as it has not had one since I got it.
They did not have the specs for the DeLorean in their computer but did the
best they could. They said they didn't want to align the rear wheels because
they were not sure they had the correct shims or procedure.
Here are the stats they printed off for me. I don't really know what they
mean at all. He said the rear wheels are out of alignment but not enough to
hurt anything. Can someone verify this? Memphis will be 1,500+ miles on my
car and I don't want to wear out my new yoko's.
CASTER-FRONT
BEFORE-Left 5.2 degrees, AFTER 4.4 degrees
BEFORE-right 5.0 degrees. AFTER 4.3 degrees
CAMBER-FRONT
Left ,0.3 AFTER 0.3
right,-0.05 AFTER -0.05
TOE:FRONT
RIGHT, -0.15, AFTER 0.00
LEFT-0.25 degrees AFTER 0.00
REAR-CAMBER
CAMBER=left, -1.6 NOT CHANGED
CAMBER=right, -1.4 NOT CHANGED
TOE-left, -0.60 degrees NOT CHANGED
TOE-right. 0.35 NOT CHANGED
Are those stats OK?
Any help would be greatly appreciated.
Thanks
David
IN2TIME-MICH
Back to the Home of PROJECT VIXEN