Re: [DML] auto transmission pan gasket

["Dave Sontos" <dsontos@xxxx>]

Go to your local auto parts store and buy a roll of cork gasket material.
Costs a couple of bucks. Unroll the material, place the pan flange side down
on the cork material, take a ink pen or #2 pencil and trace around the
outside of the flange. Next, trace all the bolt holes in the flange. Remove
the pan and trace a line one inch on the inside of the outside flange line.
Take a pair of scissors and cut out the gasket. Take a 1/4" paper hole punch
and punch out the bolt holes. Install the pan back in the car and go for a
drive and put the money you saved into a good lunch out.