Re: [DML] Bonnet

["Dave Sontos" <dsontos@xxxx>]

Your bonnet has popped because someone tried to jam too much stuff in the
trunk. I fixed mine by removing the bonnet from the car. Then where the
ground strap goes in the front edge of the stainless attached a #4 screw and
nut onto a short "L" bracket where the bracket goes over the fiberglass
part. You probably need to clamp the stainless and fiberglass parts while
attaching the bracket so you get a tight fit. The screw is completely hidden
behind the fascia.

----- Original Message -----
From: Paul Salsbury <paul.salsbury@xxxx>
To: <doc-uk@xxxxxxxxxxxxxxx>
Cc: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Thursday, April 18, 2002 9:19 AM
Subject: [DML] Bonnet


> In my quest for a flat and level bonnet, I have
> managed to get mine to sit flat to the wings at the
> wind screen end, however the front is still sitting
> proud to the facia.
> When I press down on the offending corners they go
> exactley where they should be, closer inspection
> reveales the stainless is actually lifted away from
> the black inner.
> Is there any way of re-attaching this together?
>
> Paul
> #6463
>
>
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>