Re: [DML] Window Track Tricks?

[jwit6@xxxx]

In a message dated 4/10/02 10:59:48 PM Eastern Daylight Time, 
stevepeck1@xxxx writes:

<< While fiddling with my child-of-Satan window motors and before 
getting things back in place, I discovered that the front bottom edge 
of the white plastic window track was off the track. After lots of 
tiwsting and a little bleeding, I got things back on track.

But after assembling everything, it popped off again. this time, 
totally off the track.

Is there any fix/trick to this?
>>
I think that after many years the plastic window track brackets begin to 
physically warp and distort so that keeping them on the track becomes a real 
challenge since they're not really shaped the way they need to be in order to 
function properly. I actually had to bend and reposition the metal bracketry 
supporting the plastic track bracket to get my windows to stay on track and 
work reliably...
Jim