Not so hot start problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Not so hot start problem
- From: DHughes030@xxxx
- Date: Sun, 10 Mar 2002 22:41:18 EST
I have found that when I have the idle mixture screw adjusted
properly, I have a "hot soak" starting problem. It states fine cold, runs
smoothly, but never "hunts" as I am told they should. She starts fine after
driving 20 mins. and sitting for an hour. But let her sit, (hot soak) 3
hours and she's the devil to start. Before, when the idle setting was set
too rich I NEVER had a starting concern. The fuel accumulator is 3 months
old, as is the pump and everything else in the fuel system except the
distributor and injectors. Any help would sincerely earn my gratitude.
Thanks, Don VIN 6860
Back to the Home of PROJECT VIXEN