Re: antenna wiring
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: antenna wiring
- From: "Kevin Creason" <dmc4687@xxxx>
- Date: Sun, 10 Feb 2002 19:06:45 -0600
I found the relay in the relay compartment behind the driver. I always
forget about that one. I also found my problem; it was the inline fuse. The
locking ears broke off and it sprung apart. Apparently it sometimes made
contact enough to drive it up.
Go figure!
----- Original Message -----
From: "Kevin Creason" <dmc4687@xxxx>
To: "Dmc /dml" <dmcnews@xxxxxxxxxxxxxxx>
Sent: Sunday, February 10, 2002 5:31 PM
Subject: antenna wiring
> I can't seem to find automatic antenna wiring schematics anywhere...
> My problem is this-- sometimes it decides to go up, most times not. There
is
> no clicking or clacking.
>
> I think the antenna and motor are fine-- I'm thinking it's the radio
because
> of some other issues with it (speakers and display cut out randomly or on
> bumps). But I want to test the antenna and apply some power directly
and/or
> test power supply to it when the radio is switched on.
>
> But.. while I was looking for antenna power diagrams I noticed there is a
> realy for the antenna.
> So where does the white, brown and yellow wires from the power antenna go
> to? relay? where?
>
> Thanks!
> Kevin
> #4687
>
Back to the Home of PROJECT VIXEN