Re: [DML] need photos of inside the door

[Bob Brandys <BobB@xxxx>]

Walter,

When designing and installing the full size power windows for the 97? DeLorean, I ran
into the same concerns. I noticed that the heavy duty replacement drives as well as the
stock equipment occasionally hit the outer door skin during operation.

The main reason I found for this was the difference in curves of the outer skin and the
slight flexing of the shaft for the spring worm drive depending upon the friction of the
window in its tracks.

I decided to braze a plate to the back of the tube shaft to prevent the flexing. This
also allowed me to curve the shaft to EXACTLY fit the curvature of the door skin. This
gave me the room to fit in the full size windows.

BOB