Re: [DML] Re: White Smoke

[Senatorpack@xxxx]

If the white smoke is coming from the Cat area, check the condition of 
the otterstat seal on the left hand coolant pipe in the boot.
In addition, there is a coolant drain plug and copper seal on the left 
hand side of the engine. This could have come loose, as mine did. You can 
tighten the plug with the same 3/8 drive utilized during oil plug removal for 
oil & filter changes.
Additionally, remember to pressure test your coolant system, and bleed 
ALL air from the coolant system after servicing. 

Best Wishes,
Michael Pack