Re: [DML] Inertia Switch

["jtrealtywebspannet" <jtrealty@xxxx>]

If your inertia switch is still mounted by the Lambda counter then it 
is probably the recalled one. The switch was to be replaced with an 
improved version with a white paint spot and relocated to the kick 
panel by the bonnet release. Even after resetting the "old" switch it 
may now be defective so the car won't run. To test this theory just 
connect the black/purple wire to ground, the fuel pump should now run.
David Teitelbaum
vin 10757



--- In dmcnews@xxxx, "Max Glover" <glovermr@xxxx> wrote:
> James,
> 
> Make sure the small wiring harness on the bottom of the switch is 
connected
> securely. I hit the switch while rearranging my floor mat once and 
spent
> the next hour in absolute bewilderment as to why my car refused to 

> > and the engine died. I looked at the switch and pusted the plunger
> > back down but not the fuel pump does not appear to be comming on 
as
> > the car will turn over but not start.
> >