Re: [DML] caution and warning labels

[Senatorpack@xxxx]

Paul,

Clean the old sticker off with 3 m adhesive remover. Use a heat gun to 
gently heat the new sticker, and quickly apply to the surface.

Sincerely,
Mike


In a message dated 01/01/2002 5:48:07 PM Eastern Standard Time, 
paul.salsbury@xxxx writes:

<< Subj: [DML] caution and warning labels
Date: 01/01/2002 5:48:07 PM Eastern Standard Time
From: paul.salsbury@xxxx (Paul Salsbury)
Reply-to: dmcnews@xxxxxxxxxxxxxxx
To: dmcnews@xxxxxxxxxxxxxxx

As part of my restoration I bought a complete set of Caution and Warning 
label for my car. Problem I have is they just won't stick in place, 
especially on the under side of the engine cover ie The Vacuum house routing 
label. No amount of de greasing or cleaning will let them bond to the surface.

What can I do or use to make then stick? I don't want to use a glue that id 
going to destroy anything.

Cheers

Paul
#6463