Re: [DML] Heat Stove Function.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Heat Stove Function.
- From: dherv10@xxxx
- Date: Sun, 16 Dec 2001 19:32:37 EST
Robert, I just wanted to confirm with you. I to had removed all the air mass
sensor and ran a flex pipe straight off the bottom of the air breather to the
hole in the rear quarter panel. I saw a considerable amount of pickup. I also
adjusted my air flow meter after the car warmed up to compensate if any.
Coupled with 93 octane gas and the HV coil, I see a considerable pickup. I
have take people riding in my car and they can't believe something else
hasn't been do to it. One other note, if the air mass isn't working
correctly, there will be a restriction of air and a possible richer mixture
when running. If the valve doesn't open then it will pull hot air all the
time off the exhaust manifold.
John hervey
http://www.specialtauto.com/
Back to the Home of PROJECT VIXEN