Re: High Hood
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: High Hood
- From: "daveswingle2" <dswingle@xxxx>
- Date: Thu, 13 Dec 2001 03:16:19 -0000
Actually the hood is quite adjustable. There are rubber stops at each
upper corner that can be screwed up and down into the body, and I
believe that the latch is also slightly adjustable.
Did you have the fenders off the car? You may have reinstalled them
missing the usual pile of shims between the fiberglass and the
fenders. I've seen cars with as much as 1 cm of spacers/washers in
between the fender and the fiberglass at the top edge. The production
tolerances on the fiberglass underbody were far from perfect.
Dave Swingle
--- In dmcnews@xxxx, "Paul Salsbury" <paul.salsbury@xxxx> wrote:
> Iwant to, need to adjust my hood, Now that the car is fully back
together the hood sits to high above the fenders. It lines up
perfectly with the front facia and progresivly gets higher as you get
closer the wind screen.
>
> From what I can see there is no room for adjustment.
>
> What can I do?
Back to the Home of PROJECT VIXEN