Re: Door Trim Removal.

["David Swingle" <dswingle@xxxx>]

Put the bracket on the door first, but not the handle part. Put the 
panel on. Then you can attach the handle from above by removing the 
escutcheon (the air grille thingie) and putting the two screws in 
from above. Duct-tape the screws to your screwdriver or socket. 

Dave Swingle


--- In dmcnews@xxxx, DMCVegas@xxxx wrote:
quite nicely!
> 
> Then on to the reassembly!
> 
> Does anyone have any advice on reinstalling the lower trim 
> panel? Specificly the door handle. It looks like I need to bolt 
this 
> peice in first before the trim panel. But the lip on the outside 
> holding the trim panel makes this to say the least 'challenging".
> 
> -Robert
> vin 6585 "X"