Re: [DML] Fuel Injector Question

["Dave Sontos" <dsontos@xxxx>]

Eric,
Make sure your system pressures are correct first (65 psi). If they are then
the leaking injectors must be replaced.

The definition of a leaking injector is "If a drop forms, falls from the tip
of the injector and is replaced by another drip."

High System Pressure is usually a result of a plugged return line or
inoperative system pressure regulator inside the fuel distributor.

Dave Sontos
vin 02573

----- Original Message -----
From: "Eric" <ericp@xxxx>
Subject: [DML] Fuel Injector Question

> Now comes the question - with the air sensor plate not deflected, and
> the fuel pump still running; I noticed each injector is DRIPPING.

Eric