Re: Initial starting problems!

[jtrealty@xxxx]

The two areas to investigate are the cold start valve and associated 
circuitry and the lambda system to make sure it is also functioning 
correctly. Vacuum leaks can also make things worse. My bets are on the 
cold start system so check that out first. See that initialy there is 
power to the valve when cranking and cold.
David Teitelbaum
vin 10757


--- In dmcnews@xxxx, "Thompson, Dwayne A." <dathomps@xxxx> wrote:
> I am having difficulty initially starting my "D". I turn the 
ignition and it
> starts and then it "chokes" off. I'll do that a couple more times 
before it
> starts. However, it continues to act like it wants to cut off. So I 
have to
> wait about five minutes before I can drive it w/o jerking back and 
forth.
> But after this initial difficulty it runs fine!
> 
> Blessings,
> Dwayne (VIN 1370)