Re: [DML] Noisy fuel pump (still!)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Noisy fuel pump (still!)
- From: "Walter" <Whalt@xxxx>
- Date: Sun, 28 Oct 2001 14:17:46 -0500
> Walter,
> What was the fuel level in your tank when the pump was making noise.
The level in the tank was right at half. I had been driving probably two
hours in warm weather. It doesn't get noisy until the fuel gets warm. I
suppose that a kinked or near-kinked hose could aggravate this. I'm
planning on lifting the fuel pump out while it is running & making the
noises so that I can see what is going on. I know this is dangerous to do,
so I'll have someone standing by with a fire extinguisher.
This is with the reproduction fuel suction hose. With the OEM hose, the
pump only got noisy at around 1/4 of a tank after extended driving (such as
a long trip).
When I put the pump back in last time, I was very careful to watch the
orientation of the hose. The problem might be from using a make-shift fuel
pick-up screen. But I don't see how this could be much of a problem. This
one shouldn't restrict any worse than the OEM. It's a NAPA part # STS-36.
It's rectangular in shape and on the long side runs the length of the
baffle. There is a slight chance that having it rest on the bottom of the
baffle might restrict the inlet too much, so I will look into it.
On my way home last night, the speedo quit working, so fixing that is now a
priority. Mine still has the early speedo cable, so I assume this finally
kinked and broke. I hope it didn't take my angle drive out with it!
Walt Tampa, FL
Back to the Home of PROJECT VIXEN