Re: [DML] update on speedo noise

[theshovel1224@xxxx]

A previous owner of mechanic probably "fixed" the angle drive by
epoxying the input shaft to the dust cap.

John Yeoman

--- In dmcnews@xxxx, "K Creason" <dmc4687@xxxx> wrote:
> Hmmm... the cable from AD seems to be fused with the cup. I am
trying a
> punch before I break the AD by pulling the cable end out.
> 
> ----- Original Message -----
> From: "K Creason" <dmc4687@xxxx>
> To: <dmcnews@xxxx>
> Sent: Sunday, October 07, 2001 4:07 PM
> Subject: Re: [DML] update on speedo noise
> 
> 
> > Another Question...
> > if you turn the LF wheel by hand while it's on jacks can you
normally hear
> > clicks and action from inside angle drive at the start of the
motion? Or
> > should I be working this problem until the AD is completely
silent?
> >
> >