Re: Flunk inspection/took my steering rack apart
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Flunk inspection/took my steering rack apart
- From: "David Swingle" <dswingle@xxxx>
- Date: Mon, 08 Oct 2001 01:27:22 -0000
Service manual calls for 0.3 pints (about 6 ounces) of 90W gear oil.
Lak of oil by itself will not cause play in the rack, but will cause
things to wear out faster.
If you have it this far apart the source of the play should be
obvious, either the inner tie rod ends, the tie rods themselves, or
backlash in the rack&pinion gears. The other place I've seen play is
excessive wear on the slide bearings at the end of the housing where
the rack slides back and forth.
Dave Swingle
--- In dmcnews@xxxx, johndmc57@xxxx wrote:
> I . . took my steering rack apart. I mean really apart
> (everything). Suprise, there are no bushings in the steering rack.
> Tommorrow I am going to take it to the inspection station and show
> these guys there are no bushings in the rack. My question is, would
> lack of oil cause play in the rack, mine was almost dry, and what
> would you put in for oil after I fix any leak.
Back to the Home of PROJECT VIXEN