Re: [DML] instrument cluster lights - help!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] instrument cluster lights - help!
- From: dherv10@xxxx
- Date: Fri, 5 Oct 2001 18:29:58 EDT
Andy, Several of the ground wires go to #12 & #13 by the diagram . Black is
normally always gnd on the D. I haven't take a binnacle off yet, but I have
seen the connector.12 is low beam side gnd and 13 is high beam side gnd. I
may pull my binnacle off this weekend. I haven't traced where the grounds
connect after the connector.
John
Back to the Home of PROJECT VIXEN