From: Jack The Stripper <motti@xxxx>
Reply-To: dmcnews@xxxxxxxxxxxxxxx
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Brushed stainless finish
Date: Fri, 17 Aug 2001 01:30:49 -0400
This raises an interesting question. Has anyone ever seen a DeLorean that
has
had it's entire stainless skin polished to a mirror finish or even heard of
any
existing?
Joe
Walter wrote:
> Stian,
>
> I discussed this with one of the foremost guru's of DeLorean fame, Rob
> Grady. For my situation, he suggested starting out with 80 grit sand
paper
> and finishing up with a Scotch-brite pad. I did this with excellent
> results. Rob also said that anything finer than 80 grit is more apt to
> polish rather than texture.
>
> >From my trial & error, I have learned the following: The trick is to
NOT
> cross the grain at all -- ever. Use long straight lines following the
> grain. It is better to do one narrow band running the length of the
panel
> rather than try to touch up just one small spot. When you are done, the
> finished area will be brighter than the rest, but soon it will
re-oxidize to
> match everything else.
>
> Walt Tampa, FL
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--
**********************************
"I'll tell you what to think,
I don't care what you thought!"
--"Mastermind" (Cryptic Writings)
by Megadeth (Mustaine)
**********************************
Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html
To address comments privately to the moderating team, please address:
moderator@xxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN