Re: [DML] Re: door handle installation

["Walter" <Whalt@xxxx>]

Robert,

I have no problems with your advice except for the part about using a
regular socket with a long extension. This just simply didn't work in my
passenger door. There is not a straight enough shot to get a socket on one
of the nuts. I ended up using a crowfoot & swivel which was a real pain.
When I do the driver's door, I'll see if a regular socket will work. If
not, it's back to flopping around in there with a lopsided swivel.

Thanks,
Walt Tampa, FL

----- Original Message -----
From: <DMCVegas@xxxx>
<snip>
> Installation of the door handles is fairly simple. All I used to
> remove the 2 nuts on each handle was a regular socket with a long
> extension. 
<snip>