RE: [DML] R-12 recharge
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DML] R-12 recharge
- From: "Buckner, William" <William.Buckner@xxxx>
- Date: Tue, 24 Jul 2001 16:15:28 -0400
YES!
Replace the two shraeder (sp) valves. That is where mine accumulated a
small leak. They are very cheap (inexpensive)and the little rubber o-rings
wear out and let a little refrigerant out over time.
Bill Buckner
Instrumentation Supervisor
Electrical and Instrument Dept.
Pfizer, Inc.
Global Manufacturing
Holland, MI Facility
% Phone: 616-392-2375 x-2449
* Fax: 616-392-8267
* Email: william.buckner@xxxx
-----Original Message-----
From: Delorean17@xxxx [mailto:Delorean17@xxxx]
Sent: Tuesday, July 24, 2001 12:50 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] R-12 recharge
Hello,
A friend of myne was kind enough to let me use his 30lb tank of R-12.
My
car sat untouched for 15 years so I am guessing the freon leaked out over
that time. The low pressure switch is tripped so I know there must be very
little freon in the system. I am bringing my car in on Friday morning to
have it evacuated and recharged. Are there any parts I should have replaced
at this time? or just see if it will hold a charge? Please let me know
ASAP
so I can next day air them if I need them.
Thanks
David
#6286
Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html
To address comments privately to the moderating team, please address:
moderator@xxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN