Re: [DML] window switch

[deloreanernst@xxxx]

In a message dated 7/3/01 10:20:13 PM Eastern Daylight Time, 
westiething@xxxx writes:


> I was wonderin if the passinger window switch is narrower than the driver 
> 

No, they're supposed to be the same width. The only replacemwent switches 
I'm aware of are narrower. Sounds like a replacement switch. Speaking of 
which...

I carefully pulled out my window switches to spray contact cleaner and swap 
them to see why my window wouldn't move. When I put them back in place, I 
discovered that the little retainer tabs had sheared off on both switches, so 
that the driver side switch seems loose, leaning out of position. Anyone got 
a cure for that? And a suggestion for others how to prevent it? I grasped 
each switch with my fingertips and carefully rocked it toward the front to 
lever it out. Not carefully enough, evidently! :(

-Wayne
11174


[Non-text portions of this message have been removed]