Re: [DML] plastic clutch line syndrome?

["Ryan Foster" <westiething@xxxx>]

Jeff,
I replaced my plastic clutch line with the stainless one it was fairley 
easy. The hard part was replacing the slave cylinder and bleeding it. I 
realise the DeLorean wasn't designed to repair easily.
Ryan- vin.#16301

> From: Jeff Wiltzius <wiltzius@xxxx>
> Reply-To: dmcnews@xxxxxxxxxxxxxxx
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: Re: [DML] plastic clutch line syndrome?
> Date: Tue, 26 Jun 2001 09:42:09 -0500
>
> All,
>
> Regarding the below message on the plastic clutch line- I have the
> plastic clutch line also but have been 'living' with it because I
> have read/heard that it is a fairly major operation to have the line
> replaced and that when doing it you might as well put in a whole new
> clutch also. Is there truth to this rumor or is it possible to just
> swap out the plastic line for the steel one? Any insights/experiences
> welcome!
>
> Sincerely,
> Jeff
> VIN 6145 <-still in the shop 'cause she just won't start!
>
> <snip>
> >I had the plastic line replaced with the stainless one a week ago and
> >I must say it's a BIG difference! The Problem went completely away, and
> >the point where the clutch "grips" is now in the upper quarter of the
> >pedal-way instead of all the way down.
> >I would really recommend you to replace the plastic line!
> <snip>
> --
>
> --------
> Jeff Wiltzius
> DoIT HelpDesk
> UW-Madison
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com