Re: [DML] 4th speed fan switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] 4th speed fan switch
- From: njp548@xxxx
- Date: Tue, 12 Jun 2001 16:39:27 EDT
In a message dated 6/12/01 4:25:30 PM Eastern Daylight Time,
westiething@xxxx writes:
<< I know this might sound silly, but the fourth speed on my fan doesn't work.
1. Could this be a bad switch?
2. could this be a bad fan motor?
3. any other ideas this could be?
>>
Ryan,
If its just 4th speed, then I think it might be the relay that controls
the 4th speed that is bad. Since 3rd and 4th speeds are controlled by
separate relays, I would swap those 2 relays and then see if 4th speed works
and 3rd doesn't. If that happens then replace that relay and you will be
fine.
Later,
Nick
1852
<A HREF="Http://members.aol.com/njp548">Http://members.aol.com/njp548</A>
Back to the Home of PROJECT VIXEN