Re: Resetting Lambda switch,

["David Swingle" <dswingle@xxxx>]

Don't you just love it when someone comes up with such an elegant 
solution to a problem you only have to solve every 30,000 miles 
(probably about every 10 years for must of us)! What a dedicated 
group! Gus - I'm impressed (maybe too easily)

Dave Swingle

--- In dmcnews@xxxx, gus@xxxx wrote:
> It's difficult to reset the lambda counter without removing it, but 
it
> can be done. ...> I reset mine by making an impression of the dial 
with clay, marking
> the clay with ink, and pressing a small piece of plastic against the
> clay; I used a plastic bottle cap. The ink left two dots on cap,
> forming a template. I tapped two small brads into the dots and cut
> them to about 1-2 mm high with a dremel.
> 
> Or, you could remove and replace.
> 
> 
> Gus Schlachter